We’re recruiting again!

With an increase in business we are shortly going to be recruiting for additional office staff and a service/sales manager. This has meant increasing space at Caltech HQ!

The current work being carried out is going to allow us to create an additional office for 2 people, a new meeting room and new kitchen facility.

Our workshop has already been refurbished with an increase in storage area, new larger work benches and allocated recycling areas to compy with the new Waste (Scotland) Regulations. Managing Director Andrew Renwick had this to say: “With the consistent increase in workload it has become clear that more staff are required to maintain the high levels of customer service we expect, but in order to do this a re-think of the current internal layout of our building has been needed.

“It now allows one half of our building to be solely office space at both upper and lower level with our adjoining building providing our new workshop space. We are in a fortunate location in the docks of Dundee as not only do we have 24/7 security we also have a large open space to the side of our building allowing us to place storage containers to cater for the increase in stock of spare lift parts and refurbished stairlifts which will further benefit our customers.”

Managing Director hits top of his class

“It is important to keep learning in the industry you are in and I actively make sure that both myself and our staff have the opportunities to increase our knowledge., ” sayss Caltech Lifts MD, Andrew Renwick.

“The programme LEIA runs is fantastic and I learned a lot during the course which was especially important for me as although I have been in this industry for 6 years my background is in Economics at University so it is good to get some further lift engineering knowledge.

“I am now looking to complete some more of the advanced courses as are some of the rest of the Caltech staff.”

South West Community Cycles – new Platform Lift

Caltech was excited to be involved in the refurbishment work at Pollokshaws West Railway Station (the oldest surviving station in Glasgow!) by supplying and installing a Platform Lift in a self supporting structure which now provides wheelchair access in the new South West Community Cycles facility.

The new cycle centre has been supported by Glasgow Preservation Trust and by First Scotrail, the design work was by Richard Shorter Architects and Elmwood Construction were awarded the contract to complete the work.

The center will help improve the health and education of local people and protect the local environment through the provision of affordable bike related services and activities.

The lift has just been officially handed over and Managing Director Andrew Renwick went to visit Alyson and her team yesterday to take some photos and find out more about the facility:-

“I was quite fascinated to visit this center as I think it is such a fantastic initiative to get more people active and it is a great place to educate people in bike activities as they provide training and events too. The facility is also going to be a great community hub where people can meet and have a coffee, the Platform Lift will allow the facility to be accessible by everybody in the local and surrounding communities.”

Caltech Lifts’ passion for excellence in elevation passes to next generation

Caltech Lifts founder Howard Renwick (seated) has handed over to sons Andrew (left) and Fraser.

Howard Renwick, the founder of Caltech Lifts, Dundee, today announces that, with effect from June 1 2013, he has officially retired, having handed over the reins to his sons Andrew and Fraser.

In recent months they became directors of the company and Andrew took over as Managing Director. Having seen that family succession completed successfully, Howard (66) now feels the time is right to officially retire from the business he started 35 years ago.

Almost — he plans to continue as a director of Caltech and have some continued input into its marketing, but working from home with more time for his wife Linda, his two Cocker Spaniels and his hobbies of metal detecting and photography.

Very fortunate

Why now? “No particular reason — the time was about right,” he says. “Why not? I consider myself very fortunate that two of my four children have followed me into the business. I have full faith in their ability to take it forward to new heights.”

Speaking about his father’s achievement since he found the firm in 1978, Andrew Renwick said: “My father’s decision to leave a full-time job to set up his own company at quite a young age would not have been an easy one to make, but he was determined to succeed and highly ambitious.

“This drive has been key to creating what is now a successful and well-known name in the UK lift industry. It’s important for us to continue with the same values and vision with which our father set out as we continually look to grow the business.”

Caltech Limited is one of the UK’s leading suppliers and maintainers of lifting equipment, including passenger lifts, goods lifts, disabled access lifts and stairlifts to the Public and Private Sectors, and has a turnover of £1.3m and growing. Last year it was accepted on to Business Gateway’s growth pipeline programme and plans to grow to sales of £2.2m in the next two years.

Background

Caltech was founded by Howard in 1978 as Instrument and Control Engineering, calibrating, repairing and testing items such as boiler pressure gauges for jute mills and other companies such as D.C. Thomson & Co. Ltd, Keillers (of marmalade and jam-making fame), Hydro-Electric and Occidental Petroleum. It only evolved into the lift firm it is today through happenstance — around 1985 Howard started working with a lift industry contact and realised his lifelong passion for precision engineering was ideally suited for this type of equipment. So he changed the name of his firm to Caltech Ltd — it stands for Calibration and Technology. “I thought it was very clever,” he confesses with a wry smile.

Howard’s passion for “tinkering” with things began in his childhood in Monifieth, where he would build model planes and trains with miniature diesel engines as well as tune car engines. After leaving Rannoch School, he studied at Dundee’s Commercial College before spending four years as a trainee manager at motor trade parts firm Gaedor in Trades Lane. Then a stint at the Department of Employment, working at Labour exchanges in Glasgow and Edinburgh, led to a job on a Government technology training scheme…which he left to take one of its courses in instrument calibration, testing and repair! “I was always interested in precision instruments — I’ve never regretted that,” Howard says.

That led to a job looking after the control systems at the Central Electricity Generating Board’s 2,000 Megawatt power station at Didcot, Oxfordshire. After three years Howard transferred to Dundee’s Carolina Port power plant, but seven  years later, in 1978, he was faced with the options of a transfer to Peterhead or a redundancy package. He chose the latter, partly because it came with his set of high-quality calibration equipment with which he could start his own company. In fact, Howard has only recently stopped taking on calibration work using that same kit, which he would like to hand on to someone who could use it and appreciate its quality.

Wise choice

Making the decision to go it alone has proven to be a wise choice as the company which grew from that day is now one of Scotland’s leading passenger and stairlift suppliers and installers with a turnover of £1.3m and growing.

In recent years Howard brought two of his four sons into company — Fraser (28) joined in 2002, with Andrew (31) following in 2008. Both have learned about the business from the ground up — working on lifts as well as being taught about management by their father. Andrew took over as Managing Director in March this year.

Reflecting on his most memorable lift installations over the years, Howard reckons the most lucrative was the passenger and disabled lifts at the Aberdeen Exhibition and Conference Centre in 2003 — a £200,000 contract — while the largest single one is the 40-person lift at the Johnstons of Elgin cashmere plant.

Hobby

Now he’s retiring, Howard will have more time for his main hobby — metal detecting. He actually made his first detector in 1970 using instructions in an electronics magazine, a broom handle and some foil and is a member of three clubs as this gives him access to different parts of country each Spring and Autumn. Why does he enjoy it? “The fresh air, exercise and the thrill of finding something interesting, if not valuable.”

His most interesting find was a Roman axe called a dolabrum, which he found on the top of a field in 2003 in Perthshire. Looking for confirmation of its authenticity, Howard took it to the Antiques Roadshow militaria expert when the TV show visited Dundee in 2008. He didn’t think it was Roman, or even iron, but photos sent by Howard to the Royal Museum of Scotland led to his identification being vindicated, a place for the axe in Perth Museum and a reward.

Howard’s other private passions are his Cocker Spaniels Ellie and Phoebe and photography, which he began with a box Brownie. Some of his initial retirement period will be spent sorting more than 2000 slides shot over that time!

Howard is married to Linda, a school teacher, with whom he plans to enjoy more holidays.

– See More At: Herald Scotland

Sandra Cole
Sandra Cole
05/08/2022
I would like to say a huge thank you to your team for the excellent customer service you have provided to my parents in Dundee. You have gone way beyond providing a service. My mum is disabled and cannot function at home without her stairlift. She is by all accounts housebound. The support you have given them is quite frankly unbelievable and it is blatantly apparent how much you care. I cannot recommend your company highly enough. My parents are my world and I have no words to explain just how well you have looked after them. Thank you from the bottom of my heart. You are amazing. Sandra Cole.
Lynn N
Lynn N
14/02/2022
Quoted and fitted a stairlift for my parents at short notice and at a significantly lower price than all the national competitors. Happy to support a local company, and we were delighted with the service - from sales staff to the guy who performed the installation.
kev
kev
08/06/2021
We (Alpha Projects) have worked with Caltech Lifts on several projects and would not hesitate to highly recommend the company. We have always found Caltech to offer a friendly, personable service and carry out their works in an efficient, safe and timely manner.
John Fort
John Fort
07/05/2021
Cannot thank Caltech enough for swift service in getting our lift back up and running in time when we urgently needed it most, could not have got this service any where else top job guys - Thank you again - The Fort Hotel Broughty Ferry Dundee
Jason Sellars
Jason Sellars
18/12/2020
An absolute pleasure to deal with. Having discussed my requirements Caltech were able to provide a stairlift that matched my criteria and budget perfectly. Very impressed by their clear, friendly and fast communication as well as punctuality . Installation work by engineer Tony is impeccable, and was carried out very efficiently with no disruption at all. He also gave excellent step by step instructions on using the lift (we all observed Covid awareness throughout). This stairlift has helped to lift my mum out of what has been a very difficult time for her, and I'm so pleased to have supported such a well deserving local company. Thanks again Murray, Graeme and Tony!
Robert Sloan
Robert Sloan
13/12/2020
I would highly recommend Caltech Lifts as just installed a stair lift into my mothers home. From start to finish all those involved have been very professional, efficient, keeping us informed throughout the whole process. The installation was carried out to a high standard. Special thanks to Graeme and Tony
Henry Donaldson
Henry Donaldson
19/07/2020
We recently had a problem with the lift in the care home myself and my wife run - our current service provider said we were going to have to spend £20,000 to upgrade the equipment so naturally I got a second price. To my absolute delight Caltech sent an engineer out to take details but also to spend a little time on the lift to which they managed to resolve the intermittent fault and it has now been running perfectly for 6 weeks!! Can't thank the team enough.
Brian J Kidd
Brian J Kidd
03/07/2017
Super helpful. Great service and staff, highly recommend